Warehouse and Tilt Wall Painting in Central Florida

---

There is no single number. Sun exposure, the coating used last time, and how well that job was prepped all change the answer. Joint sealants usually fail before the paint does. A condition survey shows whether you need a full repaint, spot repairs, or new sealant only. Here is more on how often commercial buildings need repainting.

Fresh panels need time. The concrete has to cure and its alkalinity has to drop, and any bond breaker or curing compound left on the face must come off. Skipping that step is a common reason for paint peeling within the first year. Lamphier & Company tests adhesion and pH before the first coat goes on.

Not usually. We phase the work by wall elevation and dock zone, so only a few doors are affected at a time. Crews can work around shipping windows or move to nights and weekends. You get the schedule before mobilization, so receiving and dispatch can plan ahead.

Panel joints depend on sealant, and sealant does not last as long as the concrete. Heat, UV, and normal panel movement crack it or pull it loose from the joint edges, and paint cannot bridge that gap. We start with commercial joint sealant replacement, and if leaks continue, our moisture diagnostics work traces the source.

Lamphier & Company paints warehouses and industrial buildings across Orange, Seminole, Osceola, Volusia, and Polk counties. That includes industrial parks along the I-4 corridor from Daytona Beach to Lakeland. For other building types in the metro, see our commercial painting in Orlando page.